TYPHON Skid Steer Models: 7 Best Sellers That Rule eBay in 2026

The V1000 is the premium choice among TYPHON skid steer models. It features a Kubota D1105 diesel engine boasting 24.4 horsepower, and it is EPA Tier 4 Final certified.

People search this model by engine name. The Kubota name means trust, and parts are everywhere. That matters to a contractor; a broken machine means lost work. Weight sits around 1.5 tons, lift goes up to 1,720 pounds, and its narrow 980mm width slips through gates easily. It turns 360 degrees and works everywhere from gardens to tight construction sites.

The hydraulic system is load-sensing. Running an attachment does not drain track power. Whether running an auger, breaker, grapple, or trencher, auxiliary flow runs 33 to 48 liters per minute.

The V1000 shines in long shifts. Diesel engines run cooler than gas, keeping fuel costs per hour low. The engine lasts thousands of hours with basic maintenance. Contractors running six days a week pick diesel because the upfront cost is higher, but the long-term cost is lower.

Who it is for: Contractors running the machine daily who demand absolute diesel reliability.

The V950 is the newest addition to the TYPHON skid steer models on eBay. It uses the same Kubota D1105 engine, outputs 25 horsepower, and has an operating load of 1,168 pounds.

The key difference is one specific feature: Automatic Load Leveling. The bucket stays level during lift and transport, requiring no constant adjusting. Time is saved on every single cycle. Tracks are high-flotation triangular rubber, remaining stable on wet, uneven ground, and slopes while keeping turf intact.

Buyers wanting the latest model year go for the V950 over other TYPHON skid steer models. It sits perfectly between the budget gas models and the premium diesel V1000.

The load leveling system is not a gimmick. Every load cycle needs adjustment on other machines, taking seconds that add up. Over a full day, the savings reach an hour or more, recovering billable time.

Who it is for: Diesel power users who want the newest features for maximum efficiency.

The 502 PRO stands out from other TYPHON skid steer models because it is built for heavy attachment work. Powered by a Honda GX690 V-Twin engine producing 22.1 horsepower, it features three pumps and three valves. Total flow reaches 10.6 GPM, and pressure hits 2,465 PSI.

That hydraulic power matters. Trenchers and augers need consistent flow. The three-pump design delivers flow without starving the tracks, keeping the attachment at full power while the machine keeps moving.

Lift is 992 pounds maximum, and operating load is 838 pounds. The bucket holds 5.37 cubic feet, and the dump height reaches 54.7 inches—meaning most trailer beds are easily within reach. Width is 40.7 inches, fitting standard gates, and its 1,962-pound weight allows a half-ton pickup to tow it.

The eBay price sits near eight thousand dollars. The three-pump setup is rare at this price point across all TYPHON skid steer models. Most machines at this price run two pumps, which starves the attachment when tracks move. Three pumps fix that. The operator runs a trencher at full depth while driving forward without stalling.

Who it is for: Users needing maximum hydraulic flow for heavy attachments.

The 507 is the cheapest way into TYPHON skid steer models. It features a 13.5 HP gas engine, weighs 1,760 pounds, and lifts 660 pounds.

With only two hydraulic valves, attachment compatibility is limited. If you need a grapple or trencher, look elsewhere. The 507 does basic work: digging, grading, moving material, bull-dozing, and ditch cleaning.

The eBay price drops below five thousand dollars, pulling in homeowners, hobby farmers, and small property owners.

For a homeowner moving ten yards of mulch a year, this entry in the TYPHON skid steer models lineup wins. It is simple, meaning fewer parts to break and lower repair bills. For a contractor digging trenches daily, simple is not enough. Always match the machine to the work.

Who it is for: Homeowners and hobby farmers performing basic material handling.

The 2000lbs model is the gas powerhouse of the TYPHON skid steer models. Running a Briggs & Stratton 23.5 horsepower engine, it weighs 2,000 pounds, lifts over 830 pounds, and reaches 6 kph.

The hydraulic system is the true differentiator. The main pump flows 11.4 GPM, while each auxiliary pump flows 5.7 GPM. Two auxiliary pumps mean two separate attachment circuits—one attachment runs while the other stays ready.

Briggs & Stratton fans pick this one over other TYPHON skid steer models. Two auxiliary circuits open options, like running a grapple on one and a bucket on the other without switching hoses or facing downtime.

Who it is for: Users needing heavy gas power and dual auxiliary circuits.

Most TYPHON skid steer models run tracks, but this Honda model runs wheels. The Honda GX690 engine puts out 22.1 horsepower. It weighs 1,830 pounds and lifts over 830 pounds.

Wheels suit specific jobs. They travel faster on pavement, cause less turf damage on dry ground, and are cheaper to replace, with the trade-off being less grip in mud and sand. It features three hydraulic valves and full attachment compatibility.

Buyers working on hard surfaces pick this unit out of all TYPHON skid steer models. On large paved jobs, time savings add up quickly since the operator covers more ground in the same day.

Who it is for: Landscapers and municipal workers needing fast wheeled mobility on pavement.

The 23 HP tracked model balances power and price across the TYPHON skid steer models. With a Briggs & Stratton engine, a 2,000-pound weight, and three pumps, it supports high-demand attachments seamlessly.

Priced near six thousand one hundred dollars on eBay (often with free shipping), it offers incredible value. The frame uses 3/8 plate steel, the hydraulic cooler is oversized, and the fan is thermostatically controlled.

Buyers who need one machine for many jobs pick this one among the TYPHON skid steer models. It hits a sweet spot: three pumps for attachment work, tracked for soft ground, and a mid-range price.

Who it is for: General users needing strong attachment capability at a balanced mid-range price.

The pattern is clear. Each of these TYPHON skid steer models has its own buyer. The V1000 and V950 serve contractors needing diesel reliability. The 502 PRO serves attachment-heavy users. The 507 serves budget buyers.

The 2000lbs and 23HP tracked models serve the middle—gas power, three pumps, and reasonable pricing. The Honda wheeled model serves the hard-surface niche.

A listing that targets one buyer converts better, and TYPHON skid steer models listings do this well. The model names signal the buyer immediately, allowing them to self-select the perfect tool.

eBay search data shows the exact patterns for TYPHON skid steer models. People search by trusted engine brands like Kubota, Honda, and Briggs & Stratton. They search by lift capacity (1,760lbs, 2,000lbs, 1,168lbs) and hydraulic setup (two-valve vs three-pump) because attachments need proper flow.

These search patterns repeat across the country. By applying these four filters, the right machine out of these TYPHON skid steer models surfaces fast.

TYPHON skid steer models rule eBay for one reason. Each model solves a specific problem. Seven models. Seven buyer profiles. Seven reasons. The right model depends entirely on the job, the budget, and the ground.

Buyers who match the model to the work get the most value. If you want to see how TYPHON is expanding beyond skid steers, read how TYPHON Machinery introduces Konstructz Series to the broader construction market.

For those requiring heavier excavation power alongside their skid steer, consider the TYPHON Kuvuo 2.7 Mini Excavator to tackle your deepest trenching needs.